D-Link DGS-3200-16 User Manual - Page 146

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch Parameter Description MBA Global State Toggle to globally enable or disable the MAC-based Access Control function on the Switch. Method Use this drop-down menu to choose the type of authentication to be used when authentication MAC addresses on a given port. The user may choose between the following methods: Local - Use this method to utilize the locally set MAC address database as the authenticator for MAC-based Access Control. This MAC address list can be configured in the MAC-based Access Control Local Database Settings window. RADIUS - Use this method to utilize a remote RADIUS server as the authenticator for MAC-based Access Control. Remember, the MAC list must be previously set on the RADIUS server and the settings for the server must be first configured on the Switch. Password Enter the password for the RADIUS server, which is to be used for packets being sent requesting authentication. The default password is "default". Guest VLAN Name Enter the name of the previously configured Guest VLAN being used for this function. Guest VLAN Member Ports Enter the list of ports that have been configured for the Guest VLAN. (e.g.: 1-5, 9) Guest VLAN ID (1-4904) Click the button and enter a Guest VLAN ID. From Port The beginning port of a range of ports to be configured for MAC-based Access Control. To Port The ending port of a range of ports to be configured for MAC-based Access Control. State Use this drop-down menu to enable or disable MAC-based Access Control on the port or range of ports selected in the Port Settings section of this window. Mode Toggle between Port Based and Host Based. Aging Time (1-1440) Enter a value between 1 and 1440 minutes. The default is 1440. Hold Time (1-300) Enter a value between 1 and 300 seconds. The default is 300. Click Apply to implement the configuration changes. 133