D-Link DGS-3200-16 User Manual - Page 52

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch SNMP v6Host Table Users can set up SNMP trap recipients for IPv6. To view the following window, click Configuration > SNMP Settings > SNMP v6Host Table: Figure 2 - 43. SNMP v6Host Table window To add a new entry to the Switch's SNMP v6Host Table, enter the information at the top of the window and then click the Apply button. To delete an existing SNMP v6Host Table entry, click the Delete button corresponding to the entry to delete. The following parameters can set: Parameter Host IPv6 Address SNMP Version Community String / SNMP V3 User Name Description Type the IP address of the remote management station that will serve as the SNMP host for the Switch. V1 - To specifies that SNMP version 1 will be used. V2c - To specify that SNMP version 2c will be used. V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Type in the community string or SNMP V3 user name as appropriate. To implement your new settings, click Apply. 39