D-Link DGS-3200-16 User Manual - Page 213

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch RADIUS Authentication Users can display information concerning the activity of the RADIUS authentication client on the client side of the RADIUS authentication protocol. To view the following window, click Monitoring > Port Access Control > RADIUS Authentication: Figure 7 - 22. RADIUS Authentication window The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands for seconds. The default value is one second. To clear the current statistics shown, click the Clear button in the top left hand corner. The following information is displayed: Parameter Description InvalidServerAddresses The number of RADIUS Access-Response packets received from unknown addresses. Identifier The NAS-Identifier of the RADIUS authentication client. (This is not necessarily the same as sysName in MIB II.) ServerIndex The identification number assigned to each RADIUS Authentication server that the client shares a secret with. AuthServerAddress The (conceptual) table listing the RADIUS authentication servers with which the client shares a secret. ServerPortNumber The UDP port the client is using to send requests to this server. RoundTripTime The time interval (in hundredths of a second) between the most recent AccessReply/Access-Challenge and the Access-Request that matched it from this RADIUS authentication server. AccessRequests The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. AccessRetransmissions The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. AccessAccepts The number of RADIUS Access-Accept packets (valid or invalid) received from this server. AccessRejects The number of RADIUS Access-Reject packets (valid or invalid) received from this server. AccessChallenges The number of RADIUS Access-Challenge packets (valid or invalid) received from this 200