D-Link DGS-3200-16 User Manual - Page 86
ISM Profile Settings, IP Multicast Profile Settings, ISM Profile Settings window
UPC - 790069312007
View all D-Link DGS-3200-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch Parameter ISM VLAN Global State VLAN Name State Member Port (e.g.: 1-4, 6) Tagged Member Port VID (2-4094) Replace Source IP Source Port (e.g.: 1-4, 6) Description Enable or disable the IGMP Snooping Multicast (ISM) VLAN Global State. Enter the name of the new Multicast VLAN to be created. This name can be up to 32 characters in length. This field will display the pre-created name of a Multicast VLAN in the Modify window. Use the pull-down menu to enable or disable the selected Multicast VLAN. Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be the untagged members of the multicast VLAN. Enter a port or list of ports that will become tagged members of the Multicast VLAN. Add or edit the corresponding VLAN ID of the Multicast VLAN. Users may enter a value between 2 and 4094. This field is used to replace the source IP address of incoming packets sent by the host before being forwarded to the source port. Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the tagged members of the multicast VLAN. ISM Profile Settings Users can configure ISM profile settngs. To view the following window, click L2 Features > IGMP Snooping > ISM Profile Settings: Figure 3 - 23. ISM Profile Settings window The following parameters may be viewed or modified: Parameter Description Profile Name Enter a name for the ISM Profile. IP Multicast Profile Settings Users can add a profile to which multicast address(es) reports are to be received on specified ports on the Switch. This function will therefore limit the number of reports received and the number of multicast groups configured on the Switch. The user may set an IP Multicast address or range of IP Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the specified switch ports. To view the following window, click L2 Features > IGMP Snooping > IP Multicast Profile Settings: 73