D-Link DGS-3200-16 User Manual - Page 89

xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 4. Multicast Listener Report, Version 2 - Comparable to the Host Membership Report in IGMPv3, and labeled as 143 in the ICMP packet header, this message is sent by the listening port to the Switch stating that it is interested in receiving multicast data from a multicast address in response to the Multicast Listener Query message. Users can configure the settings for MLD snooping. To view the following window, click L2 Features > MLD Snooping Settings: Figure 3 - 28. MLD Snooping Settings window This window displays the current MLD Snooping settings set on the Switch, defined by VLAN. To configure a specific VLAN for MLD snooping, click the VLAN's corresponding Edit button. The following parameters may be viewed or modified: Parameter Description VID VLAN Name Done Timer Node Timeout Router Timeout State This is the VLAN ID that, along with the VLAN Name, identifies the VLAN for which to modify the MLD Snooping Settings. This is the VLAN Name that, along with the VLAN ID, identifies the VLAN for which to modify the MLD Snooping Settings. Specifies the maximum amount of time a router can remain in the Switch after receiving a done message from the group without receiving a node listener report. The user may specify a time between 1 and 16711450 with a default setting of 2 seconds. Specifies the link node timeout, in seconds. After this timer expires, this node will no longer be considered as listening node. The user may specify a time between 1 and 16711450 with a default setting of 260 seconds. Specifies the maximum amount of time a router can remain in the Switch's routing table as a listening node of a multicast group without the Switch receiving a node listener report. The user may specify a time between 1 and 16711450 with a default setting of 260 seconds. Used to enable or disable MLD snooping for the specified VLAN. This field is Disabled by default. Click Apply to implement changes made. 76