D-Link DGS-3200-16 User Manual - Page 184
CPU Access Rule Detail Information window for Ethernet
UPC - 790069312007
View all D-Link DGS-3200-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch Figure 6 - 32. Add Access Rule window for Ethernet To set the Access Rule for Ethernet, adjust the following parameters and click Apply. Parameter Description Access ID (1-100) Type in a unique identifier number for this access. This value can be set from 1 to 100. Action Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that do not match the access profile are not forwarded by the Switch and will be filtered. Ethernet Type (0- Enter the appropriate Ethernet Type information. FFFF) Time Range Name Tick the check box and enter the name of the Time Range settings that has been previously configured in the Time Range Settings window. This will set specific times when this access rule will be implemented on the Switch. Ports Ticking the All Ports check box will denote all ports on the Switch. To view the settings of a previously correctly configured rule, click the corresponding Show Details button on the CPU Access Rule List window to view the following window: Figure 6 - 33. CPU Access Rule Detail Information window for Ethernet 171