D-Link DGS-3200-16 User Manual - Page 34
DHCP Auto Configuration Settings
UPC - 790069312007
View all D-Link DGS-3200-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch Parameter Description DHCP Local Relay Global State Enable or disable the DHCP Local Relay Global State. The default is Disabled. VLAN Name This is the VLAN Name that identifies the VLAN the user wishes to apply the DHCP Local Relay operation. State Enable or disable the Config DHCP Local Relay for VLAN state. DHCP/BOOTP Local Relay VID List This is a list of VLAN IDs the user wishes to apply the DHCP/BOOTP Local Relay operations. Click Apply to implement the new DHCP Local Relay Settings. DHCP Auto Configuration Settings This window is used to enable the DHCP auto configuration feature on the Switch. When enabled, the Switch is instructed to receive a configuration file from a TFTP server, which will set the Switch to become a DHCP client automatically on boot-up. To employ this method, the DHCP server must be set up to deliver the TFTP server IP address and configuration file name information in the DHCP reply packet. The TFTP server must be up and running and hold the necessary configuration file stored in its base directory when the request is received from the Switch. For more information about loading a configuration file for use by a client, see the DHCP server and/or TFTP server software instructions. The user may also consult the Upload Log File window description located in the Tools section of this manual. If the Switch is unable to complete the DHCP auto configuration, the previously saved configuration file present in the Switch's memory will be used. To view the following window, click Configuration > DHCP Auto Configuration Settings: Figure 2 - 22. DHCP Auto Configuration Settings window To enable the DHCP Auto Configuration State, use the pull-down menu to choose Enabled and click the Apply button. The following parameter may be configured or viewed: Parameter Description Auto Configuration State Enable or disable the Switch's DHCP auto configuration feature. When enabled, the Switch is instructed to receive a configuration file from a TFTP server, which will set the Switch to become a DHCP client automatically on boot-up. To employ this method, the DHCP server must be set up to deliver the TFTP server IP address and configuration file name information in the DHCP reply packet. The TFTP server must be up and running and hold the necessary configuration file stored in its base directory when the request is received from the Switch. Click Apply to set the DHCP Auto Configuration State. 21