D-Link DGS-3200-16 User Manual - Page 75
v Protocol VLAN, 802.1v Protocol Group Settings - d link 10
UPC - 790069312007
View all D-Link DGS-3200-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch 802.1v Protocol VLAN The 802.1v Protocol VLAN folder contains two windows: 802.1v Protocol Group Settings and 802.1v Protocol VLAN Settings. 802.1v Protocol Group Settings The user can create Protocol VLAN groups and add protocols to that group. The 802.1v Protocol VLAN Group Settings support multiple VLANs for each protocol and allows the user to configure the untagged ports of different protocols on the same physical port. For example, it allows the user to configure an 802.1Q and 802.1v untagged port on the same physical port. The lower half of the table displays any previously created groups. To view the following window, click L2 Features > 802.1V Protocol VLAN > 802.1v Protocol Group Settings: Figure 3 - 10. 802.1v Protocol Group Settings window The following fields can be set: Parameter Description Group ID Select an ID number for the group, between 1 and 8. Group Name This is used to identify the new Protocol VLAN group. Type an alphanumeric string of up to 32 characters. Protocol This function maps packets to protocol-defined VLANs by examining the type octet within the packet header to discover the type of protocol associated with it. Use the drop-down menu to toggle between Ethernet II, IEEE802.3 LLC, and IEEE802.3 SNAP. Protocol Value Enter a value for the Group. The protocol value is used to identify a protocol of the frame type specified. The form of the input is 0x0 to 0xffff. Depending on the frame type, the octet string will have one of the following values: For Ethernet II, this is a 16-bit (2-octet) hex value. For example, IPv4 is 800, IPv6 is 86dd, ARP is 806, etc. For IEEE802.3 SNAP, this is this is a 16bit (2-octet) hex value. For IEEE802.3 LLC, this is the 2-octet IEEE 802.2 Link Service Access Point (LSAP) pair. The first octet is for Destination Service Access Point (DSAP) and the second octet is for Source. Click Add to make a new entry and Delete All to remove an entry. 802.1v Protocol VLAN Settings The user can configure Protocol VLAN settings. The lower half of the table displays any previously created settings. To view the following window, click L2 Features > 802.1v Protocol VLAN > 802.1v Protocol VLAN Settings: 62