D-Link DGS-3200-16 User Manual - Page 82
LACP Port Settings, LACP Port Settings window, Parameter, Description, From Port
UPC - 790069312007
View all D-Link DGS-3200-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch LACP Port Settings In conjunction with the Trunking window, users can create port trunking groups on the Switch. Using the following window, the user may set which ports will be active and passive in processing and sending LACP control frames. To view the following window, click L2 Features > LACP Port Settings: Figure 3 - 18. LACP Port Settings window The user may set the following parameters: Parameter Description From Port The beginning port of a consecutive group of ports may be configured starting with the selected port. To Port The ending port of a consecutive group of ports may be configured ending with the selected port. Mode Active - Active LACP ports are capable of processing and sending LACP control frames. This allows LACP compliant devices to negotiate the aggregated link so the group may be changed dynamically as needs require. In order to utilize the ability to change an aggregated port group, that is, to add or subtract ports from the group, at least one of the participating devices must designate LACP ports as active. Both devices must support LACP. Passive - LACP ports that are designated as passive cannot initially send LACP control frames. In order to allow the linked port group to negotiate adjustments and make changes dynamically, one end of the connection must have "active" LACP ports (see above). After setting the previous parameters, click Apply to allow your changes to be implemented. 69