D-Link DGS-3620-28TC-SI Product Manual - Page 116

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide After clicking the Modify Router Port link, the following page will appear: Figure 4-56 IGMP Snooping Router Port Settings window The fields that can be configured are described below: Parameter Description Unit Select the unit you want to configure. Static Router Port This section is used to designate a range of ports as being connected to multicastenabled routers. This will ensure that all packets with such a router as its destination will reach the multicast-enabled router regardless of the protocol. Forbidden Router Port This section is used to designate a range of ports as being not connected to multicast-enabled routers. This ensures that the forbidden router port will not propagate routing packets out. Dynamic Router Port Displays router ports that have been dynamically configured. Click the Select All button to select all the ports for configuration. Click the Clear All button to unselect all the ports for configuration. Click the Apply button to accept the changes made. Click the IGMP Snooping > IGMP Snooping Rate Limit Settings, as show below: Figure 4-57 IGMP Snooping Rate Limit Settings window The fields that can be configured are described below: Parameter Description 106