D-Link DGS-3620-28TC-SI Product Manual - Page 85
PVID Auto Assign Settings, Subnet VLAN, Subnet VLAN Settings
View all D-Link DGS-3620-28TC-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Parameter Description Secondary VLAN Type Use the drop-down menu to select secondary VLAN type between Isolated or Community. Secondary VLAN Name Enter a secondary VLAN name. Secondary VLAN List Enter a list of secondary VLAN ID. Click the Add button to add a new entry based on the information entered. Click the View Private VLAN List link to view all the private VLAN. PVID Auto Assign Settings This window is used to enable or disable PVID Auto Assign Status. The default setting is enabled. To view the following window, click L2 Features > VLAN > PVID Auto Assign Settings, as show below: Figure 4-16 PVID Auto Assign Settings window Click the Apply button to accept the changes made. Subnet VLAN Subnet VLAN Settings A subnet VLAN entry is an IP subnet-based VLAN classification rule. If an untagged or priority-tagged IP packet is received on a port, its source IP address will be used to match the subnet VLAN entries. If the source IP is in the subnet of an entry, the packet will be classified to the VLAN defined for this subnet. The user can configure the subnet VLAN parameters here. To view the following window, click L2 Features > VLAN > Subnet VLAN > Subnet VLAN Settings, as show below: Figure 4-17 Subnet VLAN Settings Window The fields that can be configured are described below: Parameter Description VLAN Name Enter a VLAN Name. 75