D-Link DGS-3620-28TC-SI Product Manual - Page 259

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Regular Option Tick the check boxes to select the regular options. Internet - Routes with this community will be sent to all peers either internal or external. Local AS - Routes with this community will be sent to peers in the same AS, but will not be sent to peers in another sub AS in the same confederation and to the external peers. No Advertise - Routes with this community will not be advertised to any peer either internal or external. No Export - Routes with this community will be sent to peers in the same AS or in other sub Autonomous Systems within a confederation, but will not be sent to an external BGP (eBGP) peer. Community Set (1-65535) A community is 4 bytes long, including the 2 bytes's for the Autonomous System's number and 2 bytes for the network number This value is configured with two 2-byte numbers separated by a colon. The valid range of both number are from 1 to 65535. A community set can be formed by multiple communities, separated by a comma. Click the Apply button to accept the changes made. Click the BGP Trap Settings, as shown below: Figure 5-137 BGP Trap Settings window The fields that can be configured are described below: Parameter Description Peer Established Trap State Enable or disable the sending of the peer established trap. The default value is Disabled. Peer Idle Trap State Enable or disable the sending of the peer idle trap. The default value is Disabled. Click the Apply button to accept the changes made for each individual section. BGP Clear Settings This window is used to reset the Border Gateway Protocol (BGP) connections using hard or soft reconfigurations. To view the following window, click L3 Features > BGP > BGP Clear Settings, as shown below: 249