D-Link DGS-3620-28TC-SI Product Manual - Page 219

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide To view the following window, click L3 Features > IP Multicast Routing Protocol > DVMRP > DVMRP Interface Settings, as shown below: Figure 5-76 DVMRP Interface Settings window The fields that can be configured are described below: Parameter Description DVMRP State Click the radio buttons to enable or disable the DVMRP state. Interface Name Enter the IP interface name of DVMRP. This must be a previously defined IP interface. Click the Apply button to accept the changes made. Click the Find button to find the interface entered. Click the View All button to view all the interfaces configured on this switch. Click the Edit button to re-configure the specific entry. DVMRP Routing Table This window is used to display DVMRP routing table on the Switch. To view the following window, click L3 Features > IP Multicast Routing Protocol > DVMRP > DVMRP Routing Table, as shown below: Figure 5-77 DVMRP Routing Table window The fields that can be configured are described below: Parameter Description Source IP Address Enter the IP address of the destination. Source Netmask Enter the netmask of the destination. Click the Find button to locate a specific entry based on the information entered. Click the View All button to view all the interfaces configured on this switch. DVMRP Neighbor Table This window is used to display DVMRP neighbor table on the Switch. To view the following window, click L3 Features > IP Multicast Routing Protocol > DVMRP > DVMRP Neighbor Table, as shown below: 209