D-Link DGS-3620-28TC-SI Product Manual - Page 67

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Host IP Address Type the IP address of the remote management station that will serve as the SNMP host for the Switch. User-based Security Model SNMPv1 - Specify that SNMP version 1 will be used. SNMPv2 - Specify that SNMP version 2 will be used. SNMPv3 - Specify that SNMP version 3 will be used. Security Level NoAuthNoPriv - To specify that the SNMP version 3 will be used, with a NoAuthNoPriv security level. AuthNoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. AuthPriv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String / SNMPv3 User Name Type in the community string or SNMP V3 user name as appropriate. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. SNMPv6 Host Table Settings Users can set up SNMP trap recipients for IPv6. To view the following window, click Management > SNMP Settings > SNMPv6 Host Table Settings, as show below: 3-45 SNMPv6 Host Table Settings The fields that can be configured are described below: Parameter Description Host IPv6 Address User-based Security Model Security Level Community String / SNMPv3 User Name Type the IPv6 address of the remote management station that will serve as the SNMP host for the Switch. SNMPv1 - Specifies that SNMP version 1 will be used. SNMPv2 - Specifies that SNMP version 2 will be used. SNMPv3 - Specifies that SNMP version 3 will be used. NoAuthNoPriv - To specify that the SNMP version 3 will be used, with a NoAuthNoPriv security level. AuthNoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. AuthPriv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Type in the community string or SNMP V3 user name as appropriate. 57