D-Link DGS-3620-28TC-SI Product Manual - Page 308

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. After clicking the Add Rule button, the following page will appear: Figure 7-37 Add CPU Access Rule (IPv6 ACL) The fields that can be configured are described below: Parameter Description Access ID (1-100) Enter a unique identifier number for this access. This value can be set from 1 to 100. Auto Assign - Tick the check box will instruct the Switch to automatically assign an Access ID for the rule being created. Action Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that the packets that match the access profile are not forwarded by the Switch and will be filtered. Time Range Name Tick the check box and enter the name of the Time Range settings that has been previously configured in the Time Range Settings window. This will set specific times when this access rule will be implemented on the Switch. Ports Ticking the All Ports check box will denote all ports on the Switch. Click the Apply button to accept the changes made. Click the