D-Link DGS-3620-28TC-SI Product Manual - Page 198

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide IP Address Enter the IP address that uniquely identifies the network that corresponds to the OSPF Area. Network Mask Enter the network mask that uniquely identifies the network that corresponds to the OSPF Area. LSDB Type Use the drop-down menu to select the type of address aggregation. Options to choose from are NSSA Ext and Summary. Advertise Use the drop-down menu to enable or disable the advertisement trigger. Click the Apply button to accept the changes made. Click the Edit button to re-configure the selected entry. Click the Delete button to remove the selected entry. OSPF Host Router Settings This window is used to configure OSPF host route settings. To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Host Router Settings, as shown below: Figure 5-42 OSPF Host Router Settings window The fields that can be configured are described below: Parameter Description Host Address Enter the host's IP address used. Metric Enter a metric between 1 and 65535, which will be advertised. Area ID Enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Click the Apply button to accept the changes made. Click the Edit button to re-configure the selected entry. Click the Delete button to remove the selected entry. OSPF LSDB Table This window is used to display the OSPF Link State Database (LSDB). To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF LSDB Table, as shown below: Figure 5-43 OSPF LSDB Table window 188