D-Link DGS-3620-28TC-SI Product Manual - Page 253

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Peer Group Name Unsuppress Map Action Click the radio button and use the drop-down menu to select the name of the BGP peer group. Use the drop-down menu to select Add or Delete. Unsuppress Map Name Enter the name of a route map used to selectively advertise routes previously suppressed by the aggregate address command. Route Map Type Use the drop-down menu to select In or Out. In specifies the incoming routes from the neighbor and Out specifies the outgoing routes sent to the peer. Route Map Action Use the drop-down menu to select Add or Delete. Route Map Name Enter the route map to be applied to the incoming or outgoing routes. Click the Apply button to accept the changes made. BGP Neighbor Filter Settings This window is used to configure BGP neighbor filter settings. To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Filter Settings, as shown below: Figure 5-127 BGP Neighbor Filter Settings window The fields that can be configured are described below: Parameter Description IP Address Click the radio button and use the drop-down menu to select the IP address of the BGP speaking neighbor. Peer Group Name Click the radio button and use the drop-down menu to select the name of the BGP peer group. Filter List Type Use the drop-down menu to select In or Out to apply to either inbound or outbound traffic. Filter List Action Use the drop-down menu to select Add or Delete. Filter List Name Enter the name of an AS path access list to be applied as a filter. The filtering can be applied to incoming routes or outgoing routes. Prefix List Type Use the drop-down menu to select In or Out to apply to either inbound or outbound traffic. Prefix List Action Use the drop-down menu to select Add or Delete. Prefix List Name Enter the name of a prefix list to be applied as a filter. The filtering can be applied to incoming routes or outgoing routes. 243