D-Link DGS-3620-28TC-SI Product Manual - Page 32

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Hours (HH MM SS) This parameter is used to set the time in the day that this time range is to be enabled using the following parameters: Start Time - Use this parameter to identify the starting time of the time range, in hours, minutes and seconds, based on the 24-hour time system. End Time - Use this parameter to identify the ending time of the time range, in hours, minutes and seconds, based on the 24-hour time system. Weekdays Use the check boxes to select the corresponding days of the week that this time range is to be enabled. Tick the Select All Days check box to configure this time range for every day of the week. Click the Apply button to accept the changes made. Current configured entries will be displayed in the Time Range Information table in the bottom half of the window shown above. Port Group Settings This window is used to create port groups, and add or delete ports from the port groups. To view the following window, click System Configuration > Port Group Settings, as show below: Figure 2-18 Port Group Settings window The fields that can be configured are described below: Parameter Description Group Name Enter the name of a port group. Group ID (1-64) Enter the ID of a port group Port List Enter a port or list of ports. Tick the All check box to apply to all ports. Action Use the drop-down menu to select Create Port Group, Add Ports or Delete Ports. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. Time Settings Users can configure the time settings for the Switch. To view the following window, click System Configuration > Time Settings, as show below: Figure 2-19 Time Settings window The fields that can be configured are described below: 22