D-Link DGS-3620-28TC-SI Product Manual - Page 69

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 3-48 SNMP community Maskking Settings window The fields that can be configured are described below: Parameter Description View Name Use the drop-down menu to choose the MIB view name. Access right Use the drop-down menu to select the access right for the user using the community string. Available options are Read Only and Read Write. Enter a case-sensitive community Enter a case-sensitive community string. Enter the community again for confirmation Retype the community string for confirmation. Click the Apply button to accept the changes made. Telnet Settings Users can configure Telnet Settings on the Switch. To view the following window, click Management > Telnet Settings, as show below: Figure 3-49 Telnet Settings window The fields that can be configured are described below: Parameter Description Telnet State Telnet configuration is Enabled by default. If you do not want to allow configuration of the system through Telnet choose Disabled. Port (1-65535) The TCP port number used for Telnet management of the Switch. The "well-known" TCP port for the Telnet protocol is 23. Click the Apply button to accept the changes made. Web Settings Users can configure the Web settings on the Switch. To view the following window, click Management > Web Settings, as show below: 59