D-Link DGS-3620-28TC-SI Product Manual - Page 261

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide BGP Routing Table This window displays BGP routing. To view the following window, click L3 Features > BGP > BGP Routing Table, as shown below: Figure 5-140 BGP Routing Table window The fields that can be configured are described below: Parameter Description Type Use the drop-down menu to select Regexp, Filter List, Route Map, Prefix List, CIDR Only, Inconsistent AS, Community, Community List, IP Address or Network. The parameters in the lower section changes based on the selected type. Regexp Enter the regular expression that defines the AS path filter. Filter List Name Enter the filter list name that was previously created in BGP AS Path Access Settings window. This is used to display routes conforming to the filter list. Route Map Name Enter the filter list name that was previously created by route map. This is used to display routes matching the route map. Prefix List Name Enter the filter list name that was previously created by IP prefix list. This is used to display routes conforming to the prefix list. CIDR Only Tick Classless Inter-Domain Routing (CIDR) Only to just display routes with custom masks. Inconsistent AS Tick the check box to display the routes if they have of same prefix but different AS path originate. Community Community Set - Tick the check box and enter the community set. This value can be up to 80 characters long. Local AS - Do not send outside local AS (well-known community). No Advertise - Do not advertise to any peer (well-known community). No Export - Do not export to next AS (well-known community). Internet - Send to the Internet (well-known community>. Exact Match - If selected, communities need to match exactly. Community List Enter the community list. If the Exact Match check box is selected, communities need to match exactly. IP Address Display the host route that matches the specified IP address. 251