D-Link DGS-3620-28TC-SI Product Manual - Page 413

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Address Click the Apply button to accept the changes made. Click the Add button to add a new entry based on the information entered. Click the Find button to locate a specific entry based on the information entered. Click the View All button to display all the existing entries. DHCP Local Relay Settings The DHCP local relay settings allows the user to add option 82 into DHCP request packets when the DHCP client gets an IP address from the same VLAN. If the DHCP local relay settings are not configured, the Switch will flood the packets to the VLAN. In order to add option 82 into the DHCP request packets, the DHCP local relay settings and the state of the Global VLAN need to be enabled. To view this window, click Network Application > DHCP > DHCP Local Relay Settings as shown below: Figure 9-24 DHCP Local Relay Settings window The fields that can be configured are described below: Parameter Description DHCP Local Relay Global State Enable or disable the DHCP Local Relay Global State. The default is Disabled. VLAN Name This is the VLAN Name that identifies the VLAN the user wishes to apply the DHCP Local Relay operation. State Enable or disable the configure DHCP Local Relay for VLAN state. Click the Apply button to accept the changes made for each individual section. DNS Computer users usually prefer to use text names for computers for which they may want to open a connection. Computers themselves, require 32 bit IP addresses. Somewhere, a database of network devices' text names and their corresponding IP addresses must be maintained. The Domain Name System (DNS) is used to map names to IP addresses throughout the Internet and has been adapted for use within intranets. For two DNS servers to communicate across different subnets, the DNS Relay of the Switch must be used. The DNS servers are identified by IP addresses. Mapping Domain Names to Addresses Name-to-address translation is performed by a program called a Name server. The client program is called a Name resolver. A Name resolver may need to contact several Name servers to translate a name to an address. The Domain Name System (DNS) servers are organized in a somewhat hierarchical fashion. A single server often holds names for a single network, which is connected to a root DNS server - usually maintained by an ISP. Domain Name Resolution 403