D-Link DGS-3620-28TC-SI Product Manual - Page 200

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 5-46 OSPF Virtual Neighbor Table window The fields that can be configured are described below: Parameter Description Transit Area ID A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. Virtual Neighbor Router ID The OSPF router ID for the remote area. This is a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area's Area Border Router. Click the Find button to find the specified entry. Click the View All button to view all the entries. OSPFv3 (EI Mode Only) OSPFv3 Global Settings This window is used to configure the OSPFv3 Global settings for the Switch. To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Global Settings, as shown below: Figure 5-47 OSPFv3 Global Settings window The fields that can be configured or displayed are described below: Parameter Description OSPFv3 State Click the radio buttons to enable or disable the OSPFv3 global state. OSPFv3 Router ID Enter a 32-bit number in the form of an IPv4 address that uniquely identifies the router in the OSPFv3 domain. Setting it to be 0.0.0.0 means auto-selected. The Switch will select the largest IPv4 address among the IP interfaces to be the router ID. Current Router ID Display the OSPF Route ID currently in use by the Switch. This Route ID is displayed as a convenience to the user when changing the Switch's OSPF Route ID. Click the Apply button to accept the changes made. OSPFv3 Area Settings This window is used to configure the OSPFv3 Area settings for the Switch. To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Area Settings, as shown below: 190