D-Link DGS-3620-28TC-SI Product Manual - Page 27

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Serial Port Settings This window allows the user to adjust the Baud Rate and the Auto Logout values. To view the following window, click System Configuration > Serial Port Settings, as show below: Figure 2-10 Serial Port Settings window The fields that can be configured are described below: Parameter Description Baud Rate Specify the baud rate for the serial port on the Switch. There are four possible baud rates to choose from, 9600, 19200, 38400 and 115200. For a connection to the Switch using the console port, the baud rate must be set to 115200, which is the default setting. Auto Logout Select the logout time used for the console interface. This automatically logs the user out after an idle period of time, as defined. Choose from the following options: 2, 5, 10, 15 minutes or Never. The default setting is 10 minutes. Data Bits Display the data bits used for the serial port connection. Parity Bits Display the parity bits used for the serial port connection. Stop Bits Display the stop bits used for the serial port connection. Click the Apply button to implement changes made. Warning Temperature Settings This window allows the user to configure the system warning temperature parameters. To view the following window, click System Configuration > Warning Temperature Settings, as show below: Figure 2-11 Warning Temperature Settings window The fields that can be configured are described below: Parameter Description Traps State Log State High Threshold Use the drop-down menu to enable or disable the traps state option of the warning temperature setting. Use the drop-down menu to enable or disable the log state option of the warning temperature setting. Enter the high threshold value of the warning temperature setting. 17