D-Link DGS-3620-28TC-SI Product Manual - Page 354
MAC-based Access Control Local Settings
View all D-Link DGS-3620-28TC-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 354 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Log State Use the drop-down menu to enable or disable log state. Password Type Use the drop-down menu to select the password type. Available options are Manual String and Client MAC Address. Password Enter the password for the RADIUS server, which is to be used for packets being sent requesting authentication. The default password is "default". Trap State Use the drop-down menu to enable or disable sending out the trap for MAC-based Access Control. Max User (1-4000) Enter the maximum amount of users of the Switch. Tick the No Limit check box to have unlimited users. VLAN Name Enter the name of the previously configured Guest VLAN being used for this function. VID Click the radio button and enter a Guest VLAN ID. Member Ports Enter the list of ports that have been configured for the Guest VLAN. Unit Select the unit you want to configure. From Port / To Port Use the drop-down menus to select a range of ports to be configured for MAC-based access control. State Use this drop-down menu to enable or disable MAC-based access control on the port or range of ports selected in the Port Settings section of this window. Aging Time (1-1440) Enter a value between 1 and 1440 minutes. The default is 1440. To set this value to have no aging time, select the Infinite option. Block Time (0-300) Enter a value between 0 and 300 seconds. The default is 300. Max User (1-4000) Enter the maximum user used for this configuration. When No Limit is selected, there will be no user limit applied to this rule. Click the Apply button to accept the changes made for each individual section. MAC-based Access Control Local Settings Users can set a list of MAC addresses, along with their corresponding target VLAN, which will be authenticated for the Switch. Once a queried MAC address is matched in this window, it will be placed in the VLAN associated with it here. The Switch administrator may enter up to 128 MAC addresses to be authenticated using the local method configured here. To view this window, click Security > MAC-based Access Control (MAC) > MAC-based Access Control Local Settings as shown below: Figure 8-35 MAC-based Access Control Local Settings window The fields that can be configured are described below: Parameter Description MAC address Enter the MAC address that will be added to the local authentication list here. VLAN Name Enter the VLAN name of the corresponding MAC address here. VID (1-4094) Enter the VLAN ID of the corresponding MAC address here. Click the Add button to add a new entry based on the information entered. 344