D-Link DGS-3620-28TC-SI Product Manual - Page 28

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide (-500-500) Low Threshold Enter the low threshold value of the warning temperature setting. (-500-500) Click the Apply button to implement changes made. System Log configuration System Log Settings The Switch allows users to choose a method for which to save the switch log to the flash memory of the Switch. To view the following window, click System Configuration > System Log Configuration > System Log Settings, as show below: Figure 2-12 System Log Settings window The fields that can be configured are described below: Parameter Description System Log Use the radio buttons to enable or disable the system log settings. Click the Apply button to accept the changes made. Save Mode Use the drop-down menu to choose the method for saving the switch log to the flash memory. The user has three options: On Demand - Users who choose this method will only save log files when they manually tell the Switch to do so, either using the Save Log link in the Save folder. Time Interval - Users who choose this method can configure a time interval by which the Switch will save the log files, in the box adjacent to this configuration field. The user may set a time between 1 and 65535 minutes. Log Trigger - Users who choose this method will have log files saved to the Switch every time a log event occurs on the Switch. Click the Apply button to implement changes made. System Log Server Settings The Switch can send System log messages to up to four designated servers using the System Log Server. To view the following window, click System Configuration > System Log Configuration > System Log Server Settings, as show below: 18