D-Link DGS-3620-28TC-SI Product Manual - Page 378

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide From Port / To Port Select a range of ports to use for this configuration. State Use the drop-down menu to toggle between Enabled and Disabled. Click the Apply button to accept the changes made for each individual section. Traffic Segmentation Settings Traffic segmentation is used to limit traffic flow from a single or group of ports, to a group of ports. This method of segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of directing traffic that does not increase the overhead of the master switch CPU. To view this window, click Security > Traffic Segmentation Settings as shown below: Figure 8-59 Traffic Segmentation Settings window The fields that can be configured are described below: Parameter Description Port List Enter a port or list of ports to be included in the traffic segmentation setup. Tick the All Ports check box to select all ports for the configuration. Forward Port List Enter a port or list of ports to be included in the traffic segmentation setup. Tick the All Ports check box to select all the ports for the configuration. Unit Select the unit you want to configure. Click the Apply button to accept the changes made. 368