D-Link DGS-3620-28TC-SI Product Manual - Page 250

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 5-123 BGP Neighbor Maximum Prefix Settings window The fields that can be configured are described below: Parameter Description IP Address Click the radio button and use the drop-down menu to select the IP address of the BGP speaking neighbor. Peer Group Name Click the radio button and use the drop-down menu to select the name of the BGP peer group. Prefix Warning Threshold (1-100) Enter the percentage the maximum prefix limit on the router starts to generate a warning message. The range is from 1 to 100. Prefix Max Count (1-12000) Enter the maximum number of prefixes allowed from the specified neighbor. Prefix Warning Only Use the drop-down menu to enable or disable prefix warning only. This allows the router to generate a log message when the maximum prefix limit is exceeded, instead of terminating the peering session. Click the Apply button to accept the changes made. BGP Neighbor General Settings This window is used to configure BGP neighbor general settings. To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor General Settings, as shown below: Figure 5-124 BGP Neighbor General Settings window The fields that can be configured are described below: Parameter Description 240