D-Link DGS-3620-28TC-SI Product Manual - Page 429

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Description Unit Specifies the unit's ID used. From Port / To Port Use the drop-down menu to select a range of ports used for this configuration. State Use the drop-down menu to enable or disable the state of specific port regarding the CFM configuration. Click the Apply button to accept the changes made. CFM MIPCCM Table This window is used to display CFM MIPCCM information. To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below: Figure 10-11 CFM MIPCCM Table Window CFM Loopback Settings This window is used to CFM loopback settings. To view this window, click OAM > CFM > CFM Loopback Settings, as shown below: Figure 10-12 CFM Loopback Settings Window The fields that can be configured are described below: Parameter Description MEP Name MEP ID (1-8191) MD Name MD Index MA Name Select and enter the Maintenance End Point name used. Select and enter the Maintenance End Point ID used. Select and enter the Maintenance Domain name used. Select and enter the Maintenance Domain index used. Select and enter the Maintenance Association name used. 419