D-Link DGS-3620-28TC-SI Product Manual - Page 456

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 11-25 Ping Test window The user may click the Infinite times radio button, in the Repeat Pinging for field, which will tell the ping program to keep sending ICMP Echo packets to the specified IP address until the program is stopped. The user may opt to choose a specific number of times to ping the Target IP Address by clicking its radio button and entering a number between 1 and 255. The fields that can be configured are described below: Parameter Description Target IP Address Click the radio button and enter an IP address to be pinged. Domain Name Click the radio button and enter the domain name of the host. Repeat Pinging for Enter the number of times desired to attempt to Ping either the IPv4 address or the IPv6 address configured in this window. Users may enter a number of times between 1 and 255. Size For IPv6 only, enter a value between 1 and 6000. The default is 100. Timeout Select a timeout period between 1 and 99 seconds for this Ping message to reach its destination. If the packet fails to find the IP address in this specified time, the Ping packet will be dropped. Source IP the source IP/IPv6 address of the ping packets. If specifies source IP/IPv6 address, the IP/IPv6 address will be used as the packets' source IP address that ping send to remote host. Click the Start button to initiate the Ping Test. After clicking the Start button, the following page will appear: 446