D-Link DGS-3620-28TC-SI Product Manual - Page 372

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 8-52 Port Security Settings window The fields that can be configured are described below: Parameter Description Port Security Trap/Log Use the radio button to enable or disable Port Security Traps and Logs on the Settings Switch. System Maximum Address (1-3328) Enter the system maximum address. Unit Select the unit you want to configure. From Port / To Port Use the drop-down menus to select a range of ports to configure. Admin State Use the drop-down menu to enable or disable Port Security (locked MAC address table for the selected ports). Lock Address Mode This drop-down menu allows the option of how the MAC address table locking will be implemented on the Switch, for the selected group of ports. The options are: Permanent - The locked addresses will only age out after the Switch has been reset. DeleteOnTimeout - The locked addresses will age out after the aging timer expires. DeleteOnReset - The locked addresses will not age out until the Switch has been reset or rebooted. Max Learning Address Specify the maximum value of port security entries that can be learned on this port. (0-3328) Click the Apply button to accept the changes made for each individual section. Click the Edit button to re-configure the specific entry. Click the View Detail button to display the information of the specific entry. Click the View Detail button to see the following window. 362