D-Link DGS-3620-28TC-SI Product Manual - Page 141
Multicast Filtering Mode, ERPS Settings
View all D-Link DGS-3620-28TC-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Max Group If the checkbox Infinite is not selected, the user can enter a Max Group value. Infinite Tick the check box to enable or disable the use of the Infinite value. Action Use the drop-down menu to select the appropriate action for this rule. The user can select Drop to initiate the drop action or the user can select Replace to initiate the replace action. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Multicast Filtering Mode Users can configure the multicast filtering mode. To view the following window, click L2 Features > Multicast Filtering > Multicast Filtering Mode, as show below: Figure 4-98 Multicast Filtering Mode window The fields that can be configured are described below: Parameter Description VLAN Name/VID List The VLAN to which the specified filtering action applies. Tick the All check box to apply this feature to all the VLANs. Multicast Filtering Mode This drop-down menu allows you to select the action the Switch will take when it receives a multicast packet that requires forwarding to a port in the specified VLAN. Forward All Groups - This will instruct the Switch to forward all multicast packets to the specified VLAN. Forward Unregistered Groups - The multicast packets whose destination is an unregistered multicast group will be forwarded within the range of ports specified above. Filter Unregistered Groups - The multicast packets whose destination is a registered multicast group will be forwarded within the range of ports specified above. Click the Apply button to accept the changes made. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ERPS Settings ERPS (Ethernet Ring Protection Switching) is the first industry standard (ITU-T G.8032) for Ethernet ring protection switching. It is achieved by integrating mature Ethernet operations, administration, and maintenance (OAM) * functions and a simple automatic protection switching (APS) protocol for Ethernet ring networks. ERPS provides sub-50ms protection for Ethernet traffic in a ring topology. It ensures that there are no loops formed at the Ethernet layer. 131