D-Link DGS-3620-28TC-SI Product Manual - Page 65

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide access to devices through a combination of authentication and encrypting packets over the network. Security Level The Security Level settings only apply to SNMPv3. NoAuthNoPriv - Specify that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. AuthNoPriv - Specify that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. AuthPriv - Specify that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. SNMP Engine ID Settings The Engine ID is a unique identifier used for SNMP V3 implementations on the Switch. To view the following window, click Management > SNMP Settings > SNMP Engine ID Settings, as show below: Figure 3-42 SNMP Engine ID Settings window The fields that can be configured are described below: Parameter Description Engine ID To change the Engine ID, type the new Engine ID value in the space provided. The SNMP engine ID displays the identification of the SNMP engine on the Switch. The default value is suggested in RFC2271. The very first bit is 1, and the first four octets are set to the binary equivalent of the agent's SNMP management private enterprise number as assigned by IANA (D-Link is 171). The fifth octet is 03 to indicate the rest is the MAC address of this device. The sixth to eleventh octets is the MAC address. Click the Apply button to accept the changes made. NOTE: The Engine ID length is 10-64 and accepted characters can range from 0 to F. SNMP User Table Settings This window displays all of the SNMP User's currently configured on the Switch. To view the following window, click Management > SNMP Settings > SNMP User Table Settings, as show below: 55