D-Link DGS-3620-28TC-SI Product Manual - Page 395

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide The fields that can be configured for the Public Key Algorithm are described below: Parameter Description HMAC-RSA Use the check box to enable or disable the HMAC (Hash for Message Authentication Code) mechanism utilizing the RSA encryption algorithm. The default is enabled. HMAC-DSA Use the check box to enable or disable the HMAC (Hash for Message Authentication Code) mechanism utilizing the Digital Signature Algorithm (DSA) encryption. The default is enabled. Click the Apply button to accept the changes made. SSH User Authentication List Users can configure parameters for users attempting to access the Switch through SSH. In the window above, the User Account "username" has been previously set using the User Accounts window in the Configuration folder. A User Account MUST be set in order to set the parameters for the SSH user. To view this window, click Security > SSH > SSH User Authentication List as shown below: Figure 8-76 SSH User Authentication List window The fields that can be configured or displayed are described below: Parameter Description User Name A name of no more than 15 characters to identify the SSH user. This User Name must be a previously configured user account on the Switch. Authentication Method The administrator may choose one of the following to set the authorization for users attempting to access the Switch. Host Based - This parameter should be chosen if the administrator wishes to use a remote SSH server for authentication purposes. Choosing this parameter requires the user to input the following information to identify the SSH user. Password - This parameter should be chosen if the administrator wishes to use an administrator-defined password for authentication. Upon entry of this parameter, the Switch will prompt the administrator for a password, and then to re-type the password for confirmation. Public Key - This parameter should be chosen if the administrator wishes to use the public key on a SSH server for authentication. Host Name Enter an alphanumeric string of no more than 32 characters to identify the remote SSH user. This parameter is only used in conjunction with the Host Based choice in the Auth. Mode field. Host IP Enter the corresponding IP address of the SSH user. This parameter is only used in conjunction with the Host Based choice in the Auth. Mode field. Click the Edit button to re-configure the specific entry. Click the Apply button to accept the changes made. NOTE: To set the SSH User Authentication Mode parameters on the Switch, a User Account must be previously configured. 385