D-Link DGS-3620-28TC-SI Product Manual - Page 149

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Figure 4-104 LLDP Dot1 TLVs Settings window The fields that can be configured are described below: Parameter Description Unit Select a unit you want to configure. From Port / To Port Select the port range to use for this configuration. Dot1 TLV PVID Use the drop-down menu to enable or disable and configure the Dot1 TLV PVID option. Dot1 TLV Protocol VLAN Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol VLAN option. After enabling this option, the user can select to use either VLAN Name, VLAN ID or All in the next drop-down menu. After selecting this, the user can enter either the VLAN name or VLAN ID in the space provided. Dot1 TLV VLAN Use the drop-down menu to enable or disable, and configure the Dot1 TLV VLAN option. After enabling this option, the user can select to use either VLAN Name, VLAN ID or All in the next drop-down menu. After selecting this, the user can enter either the VLAN name or VLAN ID in the space provided. Dot1 TLV Protocol Identity Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol Identity option. After enabling this option the user can select to either use EAPOL, LACP, GVRP, STP, or All. Click the Apply button to accept the changes made. LLDP Dot3 TLVs Settings This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational specific TLV data type from outbound LLDP advertisements. To view the following window, click L2 Features > LLDP > LLDP> LLDP Dot3 TLVs Settings, as show below: 139