D-Link DGS-3620-28TC-SI Product Manual - Page 166

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide IPv6 Route Table This window is used to display the current IPv6 routing table. To view the following window, click L3 Features > IPv6 Route Table, as show below: Figure 5-4 IPv6 Route Table window The fields that can be configured are described below: Parameter Description IPv6 Address/Prefix Length Tick the check box and enter the IPv6 destination network address of the route. IPv6 Address Tick the check box and enter the IPv6 address. RIPng Tick the check box to display the RIPng route entries. OSPFv3 Tick the check box to display the OSPFv3 route entries. Hardware Tick the check box to display the route entries which have been written into hardware table. Click the Find button to locate a specific entry based on the information entered. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Policy Route Settings This window is used to create a policy route and define the rule's name. To view the following window, click L3 Features > Policy Route Settings, as show below: Figure 5-5 Policy Route Settings window The fields that can be configured are described below: Parameter Description Policy Route Name Enter the policy route name. The maximum length is 32 characters. Click the Add button to add a new entry based on the information entered. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Click the Edit button to see the following window. 156