D-Link DGS-3620-28TC-SI Product Manual - Page 337

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Limitations Using the Guest VLAN 1. Ports supporting Guest VLANs cannot be GVRP enabled and vice versa. 2. A port cannot be a member of a Guest VLAN and a static VLAN simultaneously. 3. Once a client has been accepted into the target VLAN, it can no longer access the Guest VLAN. Remember, to set an 802.1X guest VLAN, the user must first configure a normal VLAN, which can be enabled here for guest VLAN status. Only one VLAN may be assigned as the 802.1X guest VLAN. To view this window, click Security > 802.1X > Guest VLAN Settings as shown below: Figure 8-13 Guest VLAN Settings window The fields that can be configured are described below: Parameter Description VLAN Name Enter the pre-configured VLAN name to create as an 802.1X guest VLAN. Port Set the ports to be enabled for the 802.1X guest VLAN. Click the All button to select all the ports. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry based on the information entered. Authenticator State This window is used to display the authenticator state. This window appears when the Authentication State is enabled in 802.1X Global Settings window. To view this window, click Security > 802.1X > Authenticator State as shown below: Figure 8-14 Authenticator State window The fields that can be configured are described below: Parameter Description Unit Select a unit you want to display. Port Use the drop-down menu to select a port to display. Click the Find button to locate a specific entry based on the information entered. Click the Refresh button to refresh the display table so that new entries will appear. 327