Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 128
Table 4-7., Descriptions of, output, show chassis brief, show rpm
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
www.dell.com | support.dell.com Table 4-7. Descriptions of show rpm output Field Jumbo Capable CP Boot Flash RP1 Boot Flash RP2 Boot Flash CP Mem Size RP1 Mem Size PR2 Mem Size Temperature Power Status Voltage Serial Num Part Num Vendor ID Date Code Country Code Description Displays a Yes or No indicating if the RPM is capable of sending and receiving Jumbo frames. This field does not indicate if the chassis is in Jumbo mode; for that determination, use the show chassis brief command. Displays the two possible Boot Flash versions for the Control Processor. The [Booted] keyword next to the version states which version was used at system boot. Displays the two possible Boot Flash versions for the Routing Processor 1. The [Booted] keyword next to the version states which version was used at system boot. Displays the two possible Boot Flash versions for the Routing Processor 2. The [Booted] keyword next to the version states which version was used at system boot. Displays the memory of the Control Processor. Displays the memory of the Routing Processor 1. Displays the memory of the Routing Processor 2. Displays the temperature of the RPM. Minor alarm status if temperature is over 65° C. Lists the status of the power modules in the chassis. Displays the power rails for the line card. Displays the line card serial number. Displays the line card part number. Displays an internal code, which specifies the manufacturing vendor. Displays the line card's manufacturing date. Displays the country of origin. 01 = USA Related Commands show chassis show linecard show sfm View information on all elements of the system. View information on a line card. View information on the SFM. 128 | Control and Monitoring