Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 439

clear counters c e s Clear the counters used in the show interfaces commands for all VRRP groups, VLANs, and physical interfaces, or selected ones. Syntax clear counters [interface] [vrrp [vrid] | learning-limit] Parameters interface vrrp vrid learning-limit (OPTIONAL) Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a port channel interface, enter the keyword port-channel followed by the number of the port channel: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 255 for TeraScale and ExaScale • For the management interface on the RPM, enter the keyword ManagementEthernet followed by slot/port information. The slot range is 0-1, and the port range is 0. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the keyword vrrp to clear statistics for all VRRP groups configured. Enter a number from 1 to 255 as the vrid. (OPTIONAL) Enter the keyword learning-limit to clear unknown source address (SA) drop counters when MAC learning limit is configured on the interface. Note: This option is not supported on the S-Series, as the MAC learning limit is not supported Defaults Without an interface specified, the command clears all interface counters. Command Modes EXEC Privilege Command History Version 8.3.3.1 Version 8.2.1.0 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 6.5.1.0 Introduced on the S60. Support for 4093 VLANs on E-Series ExaScale. Prior to release supported 2094. Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Updated definition of the learning-limit option for clarity. Example Figure 15-1. clear counters Command Example Force10#clear counters Clear counters on all interfaces [confirm] Related Commands mac learning-limit show interfaces Allow aging of MACs even though a learning-limit is configured or disallow station move on learnt MACs. Displays information on the interfaces. Interfaces | 439