Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 926

www.dell.com | support.dell.com tacacs-server key c e s Configure a key for communication between a TACACS+ server and client. Syntax tacacs-server key [encryption-type] key To delete a key, use the no tacacs-server key key Parameters encryption-type key (OPTIONAL) Enter either zero (0) or 7 as the encryption type for the key entered. The options are: • 0 is the default and means the key is not encrypted and stored as clear text. • 7 means that the key is encrypted and hidden. Enter a text string, up to 42 characters long, as the clear text password. Leading spaces are ignored. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.3.1 Version 7.7.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on S60 Authentication key length increased to 42 characters Introduced for S-Series Introduced for C-Series Introduced on E-Series Usage The key configured with this command must match the key configured on the TACACS+ daemon. Information Port Authentication (802.1X) Commands The 802.1X Port Authentication commands are: • dot1x authentication (Configuration) • dot1x authentication (Interface) • dot1x auth-fail-vlan • dot1x auth-server • dot1x guest-vlan • dot1x max-eap-req • dot1x port-control • dot1x quiet-period • dot1x reauthentication • dot1x reauth-max • dot1x server-timeout • dot1x supplicant-timeout • dot1x tx-period • show dot1x interface 926 | Security