Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 545
show ip route all Command Example, connected, static, summary
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 545 highlights
protocol process-id routing-tag connected all static summary (OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf, rip) or the keywords connected or static. bgp, isis, ospf, rip are E-Series-only options. If you enter bgp, you can include the BGP as-number. (E-Series only) If you enter isis, you can include the ISIS routing-tag. (E-Series only) If you enter ospf, you can include the OSPF process-id. (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed. (OPTIONAL) Specify that only ISIS routes with a certain routing tag must be displayed. (OPTIONAL) Enter the keyword connected to view only the directly connected routes. (OPTIONAL) Enter the keyword all to view both active and non-active routes. (OPTIONAL) Enter the keyword static to view only routes configured by the ip route command. (OPTIONAL) Enter the keyword summary. See show ip route summary. Command Modes EXEC EXEC Privilege Command History Version 8.3.3.1 Version 8.1.1.0 Version 7.9.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the S60. Introduced on E-Series ExaScale Introduced VRF on the E-Series Introduced on S-Series Introduced on C-Series Introduced for E-Series Example Figure 16-20. show ip route all Command Example Force10#show ip route all Codes: C - connected, S - static, R - RIP B - BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1 N2 - OSPF NSSA external type 2, E1 - OSPF external type 1 E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1 L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default > - non-active route + - summary route Gateway of last resort is not set Destination ----------R 3.0.0.0/8 C 100.10.10.0/24 > R 100.10.10.0/24 C 101.10.10.0/24 > R 101.10.10.0/24 Force10# Gateway ------via 100.10.10.10, So 2/8 via 101.10.10.10, So 2/9 Direct, So 2/8 Direct, So 2/8 Direct, So 2/9 Direct, So 2/9 Dist/Metric Last Change 120/1 00:07:12 0/0 120/0 0/0 120/0 00:08:54 00:08:54 00:09:15 00:09:15 IPv4 Routing | 545