Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 387

Figure 10-10. Command Example: test cam-usage (S-Series) Force10#test cam-usage service-policy input LauraIn stack-unit all Stack-Unit | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 0 | 0 | IPv4Flow | 102 | 0 | Allowed 0 | 1 | IPv4Flow | 102 | 0 | Allowed Force10# ! Force10#test cam-usage service-policy input LauraIn stack-unit 0 port-set 1 Stack-Unit | Portpipe | CAM Partition | Available CAM | Estimated CAM per Port | Status 0 | 1 | IPv4Flow | 102 | 0 | Allowed Force10# Table 10-2. Output Explanations: test cam-usage (S-Series) Term Stack-Unit Portpipe CAM Partition Available CAM Estimated CAM per Port Status Explanation Lists the stack unit or units that are checked. Entering all shows the status for all stacks. Lists the portpipe (port-set) or port pipes (port-sets) that are checked. Entering all shows the status for linecards and port-pipes in the chassis. Shows the CAM profile of the CAM Identifies the amount of CAM space remaining for that profile Estimates the amount of CAM space the listed policy will require. Indicates whether or not the policy will be allowed in the CAM Content Addressable Memory (CAM) | 387