Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 285

Parameters number Enter a number as the metric to be assigned to routes from other protocols. Range: 1 to 4294967295. Defaults 0 Command Modes ROUTER BGP Usage The default-metric command in BGP sets the value of the BGP MULTI_EXIT_DISC (MED) attribute Information for redistributed routes only. Related Commands bgp always-compare-med redistribute Enable comparison of all BGP MED attributes. Redistribute routes from other routing protocols into BGP. Command History Version 8.3.3.1 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S60. Introduced support on S-Series Introduced support on C-Series description c e s Enter a description of the BGP routing protocol Syntax description {description} To remove the description, use the no description {description} command. Parameters description Enter a description to identify the BGP protocol (80 characters maximum). Defaults No default behavior or values Command Modes ROUTER BGP Command History Version 8.3.3.1 Version 7.8.1.0 Version 7.7.1.0 pre-7.7.1.0 Introduced on the S60. Introduced support on S-Series Introduced support on C-Series Introduced Related Commands router bgp Enter ROUTER mode on the switch. distance bgp c e s Configure three administrative distances for routes. Syntax distance bgp external-distance internal-distance local-distance To return to default values, enter no distance bgp. Border Gateway Protocol IPv4(BGPv4) | 285