Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 733

Table 26-5. Command Example Descriptions: show ip ospf process-id database external Item Length Network Mask Metrics Type TOS Metrics Forward Address External Route Tag Description Displays the length in bytes of the LSA. Displays the network mask implemented on the area. Displays the external type. Displays the TOS options. Option 0 is the only option. Displays the LSA metric. Identifies the address of the forwarding router. Data traffic is forwarded to this router. If the forwarding address is 0.0.0.0, data traffic is forwarded to the originating router. Displays the 32-bit field attached to each external route. This field is not used by the OSPF protocol, but can be used for external route management. Related Commands show ip ospf database Displays OSPF database information. show ip ospf database network c e s Display the network (type 2) LSA information. Syntax show ip ospf process-id database network [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.3.1 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S60 Introduced support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Open Shortest Path First (OSPFv2 and OSPFv3) | 733