Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 317

Example Figure 8-11. Command Example: show ip bgp dampened-paths Force10>show ip bgp damp BGP table version is 210708, local router ID is 63.114.8.2 Status codes: s suppressed, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network Origin codes: i - IGP, e - EGP, ? - incomplete Network From Reuse Path Force10> Table 8-5 defines the information displayed in Figure 8-11. Table 8-5. Command Example: show ip bgp dampened-paths Field Network From Reuse Path Description Displays the network ID to which the route is dampened. Displays the IP address of the neighbor advertising the dampened route. Displays the hour:minutes:seconds until the dampened route is available. Lists all the ASs the dampened route passed through to reach the destination network. Command History Version 8.3.3.1 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S60. Introduced support on S-Series Introduced support on C-Series show ip bgp detail c e s Display BGP internal information for IPv4 Unicast address family. Syntax show ip bgp [ipv4 unicast] detail Defaults none Command Modes EXEC EXEC Privilege Border Gateway Protocol IPv4(BGPv4) | 317