Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 975
snmp-server group
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 975 highlights
Related Commands show snmp engineID show running-config snmp Display SNMP engine and all remote engines that are configured on the router Display the SNMP running configuration snmp-server group c e s Configure a new SNMP group or a table that maps SNMP users to SNMP views. Syntax snmp-server group [group_name {1 | 2c | 3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] To remove a specified group, use the no snmp-server group [group_name {v1 | v2c | v3 {auth | noauth | priv}}] [read name] [write name] [notify name] [access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] command. Parameters group_name 1 | 2c | 3 auth noauth priv read name write name notify name access-list-name ipv6 access-list-name access-list-name ipv6 access-list-name Enter a text string (up to 20 characters long) as the name of the group. Defaults: The following groups are created for mapping to read/write community/security-names. • v1v2creadg - maps to a community/security-name with ro permissions • 1v2cwriteg - maps to a community/security-name rw permissions (OPTIONAL) Enter the security model version number (1, 2c, or 3). • 1 is the least secure version • 3 is the most secure of the security modes. • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. Default: 1 (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword noauth to specify no authentication of a packet. (OPTIONAL) Enter the keyword priv to specify both authentication and then scrambling of the packet. (OPTIONAL) Enter the keyword read followed by a name (a string of up to 20 characters long) as the read view name. Default: GlobalView is set by default and is assumed to be every object belonging to the Internet (1.3.6.1) OID space. (OPTIONAL) Enter the keyword write followed by a name (a string of up to 20 characters long) as the write view name. (OPTIONAL) Enter the keyword notify followed by a name (a string of up to 20 characters long) as the notify view name. (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 followed by the IPv6 access list name (a string up to 16 characters long) (Optional) Enter both an IPv4 and IPv6 access list name. SNMP and Syslog | 975