Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 909

After configuring the aaa authentication login command, configure the login authentication command to enable the authentication scheme on terminal lines. Connections to the SSH server will work with the following login mechanisms: local, radius and tacacs. Related Commands login authentication password radius-server host tacacs-server host Apply an authentication method list to designated terminal lines. Create a password. Specify a RADIUS server host. Specify a TACACS+ server host. access-class c e s Restrict incoming connections to a particular IP address in a defined IP access control list (ACL). Syntax access-class access-list-name To delete a setting, use the no access-class command. Parameters access-list-name Enter the name of an established IP Standard ACL. Defaults Not configured. Command Modes LINE Command History Version 8.3.3.1 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced on S60 Introduced for S-Series Introduced for C-Series Introduced on E-Series Related Commands line ip access-list standard ip access-list extended Apply an authentication method list to designated terminal lines. Name (or select) a standard access list to filter based on IP address. Name (or select) an extended access list based on IP addresses or protocols. enable password c e s Change the password for the enable command. Syntax enable password [level level] [encryption-type] password To delete a password, use the no enable password [encryption-type] password [level level] command. Security | 909