Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 144

www.dell.com | support.dell.com Version 7.5.1.0 Introduced on C-Series E-Series original Command terminal xml c e Enable XML mode in Telnet and SSH client sessions. Syntax terminal xml To exit the XML mode, enter terminal no xml. Defaults Disabled Command Modes EXEC EXEC Privilege Command History Version 8.1.1.0 Version 7.7.1.0 Version 6.5.1.0 Introduced on E-Series ExaScale Introduced on C-Series Introduced for E-Series Usage Information This command enables the XML input mode where you can either cut and paste XML requests or enter the XML requests line-by-line. For more information on using the XML feature, refer to the XML chapter in the FTOS Configuration Guide. traceroute c e s View a packet's path to a specific device. Syntax traceroute {host | vrf instance | ip-address | ipv6-address} Parameters host vrf instance ip-address ipv6-address Enter the name of device. (Optional) E-Series Only: Enter the keyword vrf followed by the VRF Instance name. Enter the IP address of the device in dotted decimal format. Enter the IPv6 address, in the x:x:x:x::x format, to which you are testing connectivity. Note: The :: notation specifies successive hexadecimal fields of zeros Defaults Timeout = 5 seconds; Probe count = 3; 30 hops max; 40 byte packet size; UDP port = 33434 Command Modes EXEC EXEC Privilege Command History Version 8.3.3.1 Version 8.2.1.0 Version 8.1.1.0 Version 7.9.1.0 Introduced on the S60. Introduced on E-Series ExaScale with IPv6 Introduced on E-Series ExaScale (IPv4 only) Introduced VRF. 144 | Control and Monitoring