Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 166
Example, Syntax, Command Modes, Command, History, reset
View all Dell Force10 S60-44T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
www.dell.com | support.dell.com Example => printenv baudrate=9600 uboot_filesize=0x80000 bootfile=FTOS-SC-1.2.0.0E3.bin bootcmd=echo Booting primary bootline....;$primary_boot;boot;echo Failed;echo Booting secondary bootline....;$secondary_boot;boot;echo Failed;echo Booting default bootline....;$default_boot;boot;echo Failed;echo Rebooting...;reset bootdelay=5 loads_echo=1 rootpath=/opt/nfsroot hostname=unknown loadaddr=640000 ftpuser=force10 ftppasswd=force10 uboot=u-boot.bin tftpflash=tftpboot $loadaddr $uboot; protect off 0xfff80000 +$filesize; erase 0x fff80000 +$filesize; cp.b $loadaddr 0xfff80000 $filesize; protect on 0xfff80000 +$filesize; cmp.b $loadaddr 0xfff80000 $filesize ethact=eTSEC1 ethaddr=00:01:E8:82:09:B2 serverip=10.11.9.4 primary_boot=f10boot tftp://10.11.9.2/si-s60-40g secondary_boot=f10boot flash0 MAC Address default_boot=f10boot tftp://192.168.128.1/FTOS-SC-1.2.0.0E3.bin gatewayip=10.11.192.254 ipaddr=10.11.198.114 netmask=255.255.0.0 mgmtautoneg=true mgmtspeed100=true mgmtfullduplex=true stdin=serial stdout=serial stderr=serial Environment size: 1002/8188 bytes => Default Gateway Address Management IP Address Boot Variables reset Reload the S60 system. Syntax reset Command Modes uBoot Command History Version 8.3.3.1 Introduced on the S60. 166 | S60 u-Boot