Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 440

www.dell.com | support.dell.com clear dampening c e s Clear the dampening counters on all the interfaces or just the specified interface. Syntax clear dampening [interface] Parameters interface (Optional) Enter one of the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a port channel interface, enter the keyword port-channel followed by a number: C-Series Range: 1-128 E-Series Range: 1 to 255 for TeraScale and ExaScale • For a SONET interface, enter the keyword sonet followed by the slot/ port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Defaults Without a specific interface specified, the command clears all interface dampening counters Command Modes EXEC Privilege Command History Version 8.3.3.1 Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Introduced on the S60. Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced on E-Series Example Force10#clear dampening gigabitethernet 1/2 Clear dampening counters on Gi 1/2 [confirm] y Force10# Related Commands show interfaces dampening dampening Display interface dampening information. Configure dampening on an interface. cx4-cable-length s Configure the length of the cable to be connected to the selected CX4 port. Syntax Parameters [no] cx4-cable-length {long | medium | short} long | medium | short Enter the keyword that matches the cable length to be used at the selected port: short = For 1-meter and 3-meter cable lengths medium = For 5-meter cable length long = For 10-meter and 15-meter cable lengths 440 | Interfaces