Dell Force10 S60-44T FTOS Command Line Reference Guide for the S60 System FTOS - Page 762

www.dell.com | support.dell.com Command Modes CONFIGURATION Command History Version 8.3.3.1 Version 8.1.1.0 Version 7.8.1.0 Version 7.7.1.1 Introduced on S60 Introduced on E-Series ExaScale Introduced Introduced Usage This command configures an expiration timer for all S.G entries, unless they are assigned to an Information Extended ACL. ip pim spt-threshold c e Configure PIM router to switch to shortest path tree when the traffic reaches the specified threshold value. Syntax ip pim spt-threshold value | infinity To return to the default value, enter no ip pim spt-threshold. Parameters value infinity (OPTIONAL) Enter the traffic value in kilobits per second. Default: 10 packets per second. A value of zero (0) will cause a switchover on the first packet. (OPTIONAL) To never switch to the source-tree, enter the keyword infinity. Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.3.1 Version 8.1.1.0 Version 7.8.1.0 Introduced on S60 Introduced on E-Series ExaScale Introduced on C-Series on port-channels and S-Series Usage This is applicable to last hop routers on the shared tree towards the Rendezvous Point (RP). Information show ip pim bsr-router c e s View information on the Bootstrap router. Syntax show ip pim bsr-router Command Modes EXEC EXEC Privilege Command History Version 8.3.3.1 Version 8.1.1.0 Version 7.8.1.0 Introduced on S60 Introduced on E-Series ExaScale Introduced on S-Series 762 | PIM-Sparse Mode (PIM-SM)